KINEX sealed bottom bracket (square taper)
Main Photo
Category:  Bottom Brackets
Name:  KINEX sealed bottom bracket (square taper)
Brand:  KINEX
Years:  1987 - Current
Country:  Slovakia
Added By: jenda on 04/01/15
Updated By: jenda on 04/01/15
Additional Photos - click for full size
KINEX sealed bottom bracket (square taper)KINEX sealed bottom bracket (square taper)KINEX sealed bottom bracket (square taper)KINEX sealed bottom bracket (square taper)
Bearing Size/Count per sideSealed BearingsSpindle MarkingsSlovakia Kinex
Fixed Cup MarkingsKinexAdjustable Cup MarkingsKinex
Spindle StyleSquare TaperAxle MaterialCr-Mo
Available ThreadingsEnglish/ISO: 1.370 x 24;
Italian: 36mm x 24
Length(s)107, 110, 113, 115.5, 119, 122.5, 127, 131, 134.5, 138mm
Tools NeededASSOS BB Tool;
Campagnolo BB Tool; FAG BB tool
General Information
Production of these spindles started in former Czechoslovakia in 1987 and currently they are made in Slovakia. As both cups are removable, they can be replaced with any of following types, all with either BSA or Italian threads:

- plastic for FAG tool
- zinc-coated steel for FAG tool (used on Campagnolo Veloce BB)
- plastic for Shimano splined tool
- aluminium for Shimano tool
- zinc-coated steel for Shimano tool
- zinc-coated steel for Campagnolo tool

I have seen even combinations using different cups (plastic/Al, FAG/Shimano, etc.) and also the combination where the R/H cup had Italian thread when cutting bigger thread was the only way how to save the frame.

There are number of these spindles (with Kinex Slovakia on them) used with Campagnolo cups so I believe KINEX are cooperating with Campagnolo.
See Incorrect Information? Log-in to submit report.  
Additional Resources
Marketplace:Looking to buy one of these?Sell one like this
Resources:Reference & Charts
Component VariationsView Detailed List  Manage Variations
Variations of Component exist (Component is 1 of 2)BrandGroup
KINEX sealed bottom bracket (cottered)KINEX
User Comments
Required
  Loading Comments

By pressing Verify below, you express verification that the photos shown are indeed of the component listed. Please do not verify if you are not sure that all photos are of the correct item. If you identify a photo that is NOT of the correct item, please use the Report feature to flag that photo.

Note: You can not verify photos that you have uploaded.
Brooks Saddles
VeloBase v.2.7.8 rev.5 - a Fischer Frameworks application, Copyright ¬© (2020) - All rights reserved.

Find the information on useful? Please consider donating a few dollars towards the web-hosting cost. Thank you.